You don’t have permission to view this collection. The owner may have made this collection private.

Access Denied

Access all your saved training materials and resources in this collection.

Share collection

Create a new collection

Organize your favorite content in this custom collection.

Edit category

Edit collection

Are you sure you want to delete the collection? You cannot undo this action.

Delete collection?

Are you sure you want to delete the category? You cannot undo this action.

Delete category?

Disenroll

No courses are available at the moment; check back later.

Filters

Internet Explorer is not supported

Visit the forum section and start contributing with your knowledge!

Forum activity

Please click "Update" if you want a new profile image. 

Or "Delete" if you don't want any image to be displayed. The default avatar will be applied automatically.

Edit your profile image

Please upload a square imageand file size less than 2MB. Accepted file formats: PNG and JPG.

Update profile image

Notifications

Notifications settings

My Learning & Support account

To get the most out of 3Shape Learning & Support, please add the missing details below.

Finish setting up your profile

Forum boards

Forum discussions

Email Notifications

Are you sure you want to unfollow the selected forum board(s) or discussion(s)?

Post to forum

Subject

Write a descriptive, yet concise subject line for your post. The more to the point, the better.

Have a question, or want to start a discussion? 

Report inappropriate content

Title

Speakers

Watch webinar now

On-demand webinar: {{title}}

Oops

NOTE: Due to high level of interest the time of delivery is approximately 1,5 months at the moment. 

Thank you for joining the 3Shape Community. As a small token of our gratitude, we offer you a welcome kit, including a selection of merchandise for you and your colleagues. You can use it to signal to your patients, peers and business partners that you are doing digital dentistry the smart way. The kit is available exclusively for 3Shape system owners (requires an active dongle number, which can only be entered once). Due to customs restrictions, there may be limited availability in some regions. Order your kit here.

Troubleshooting

"Empty scan. Ensure the object is in scanner" when scanning on E-scanners with Adesso Artex transfer plates in ScanItDental

General article: "Calibration failed” errors during lab scanner calibration

General article: Error messages when scanning with a lab scanner in 3Shape ScanIt Dental

Insufficient scan quality when scanning metal abutments with 3Shape lab scanners

Insufficient scan quality when scanning with a 3Shape lab scanner

Is it OK that blue lines are on when E-scanner is not scanning?

"Scanning not allowed while toplight is on" when scanning in DS-2018 or lower with E1, E2 or E3 scanner